The working principle of the paper cutting machine:
The operation of the paper cutter is relatively simple, and the environmental requirements are not high. Usually, power is supplied in the general office to ensure power supply. The general paper cutter is equipped with an automatic switching system. If the paper is inserted into the equipment, the paper cutter will be automatically cut. Others also need to press the start button, and the paper cutter will rotate and continue to cut the paper. When the paper is finished, press the stop / reverse key to stop the cutter.
Analysis of the reasons for the easy breaking of the insurance screw for the program controlled paper cutting machine
The development and evolution of the paper cutting machine
The working principle of the paper dividing machine:
1. the fixed length and cutting process of the whole or whole raw material, such as plastic packing material, packaging carton, steel plate, film, leather, wood chips, etc., should be used for cutting and cutting, and the fixed length cutting control should be used.
2. the cutting length can be set continuously. If the actual cutting length is error, it is easy to calibrate by setting parameters.
The 3. paper cutting machine is divided into two types: static and dynamic cutting. The cutting machine is stopped at the time of setting, then static cutting, and then restarting and running again. When the set length arrives, the cutting signal is not stopped at the end of the machine, and the cutting machine is cut and cut during the moving process of the material.