banner
Home » Knowledge » Content
Product Categories

Daily maintenance of cutting machine Did you know?

- Mar 29, 2018 -

You will use a cutting machine Then you know how to care for the cutting machine? Only the daily maintenance of the cutting machine will bring you more benefits in the future. How to maintain it? The following Xiao Bian will talk about you;

Every time before using the device, the left and right ends of the cutter must be lubricated with a spring, and the cutter must be lifted up and down. In order to enable the cutter to be smooth during use, it is necessary to place the device in the active position after the start of use. Adding lubricating oil; if the daily maintenance is not enough will lead to the phenomenon that the cutting knife cannot be lifted. If this phenomenon occurs, it is necessary to check whether the switch and the cam are normal and whether the screws are loose, and then turn the cam by hand to try Cut and check if there is any rust on the drive connecting rod. Check whether the spring is too tight before cutting every day.

Cutting machine

If the cutting machine is blunt and needs to use a sharpening knife, if there is no need to sharpen the knife, there will be continuous cutting, and the effect of the use will also cause the use efficiency to be greatly reduced! And the cutting machine is preferably installed near the printing press.

The above is the maintenance method of the cutting machine. I hope this article can help you.